Pre-Purchase Building Inspection Agreement:

TYPE OF PROPOSED INSPECTION ORDERED BY YOU:

Inspection & Report: The inspection will be of the Building Elements as outlined in Appendix C of AS4349.1-2007 except for Strata title properties where the inspection will be according to Appendix B of AS4349.1-2007.

A copy of the appropriate Standard with Appendices may be obtained from RAPID Solutions at Your cost by phoning (02) 4954 3655 or by email to support@rapidsolutions.com.au or from Standards Australia.

We will carry out the inspection and report ordered by You in accordance with this agreement and You agree to pay for the inspection on or before delivery of the report.

In ordering the inspection, You agree that the inspection will be carried out in accordance with the following clauses, which define the scope and limitations of the inspection and the report.

SCOPE OF THE INSPECTION & THE REPORT

The Inspection will be carried out in accordance with AS4349.1-2007. The purpose of the inspection is to identify major defects, the incidence of minor defects and safety hazards associated with the property at the time of the inspection. The inspection and reporting is limited to Appendix C of AS4349.1-2007.

LIMITATIONS

18. The Inspection Will not cover or report the items listed in Appendix D to AS4349.1-2007.

COMPLAINTS PROCEDURE


THIRD PARTIES

26. Prohibition on the Provision or Sale of the Report

27. Release

28. Indemnity

DEFINITIONS:

You should read and understand the following definitions of words used in this Agreement and the Report. This will help You understand what is involved in a property and building inspection, the difficulties faced by the inspector and the contents of the Report which We will provide You following the Inspection.

Acceptance Criteria: The Building shall be compared with a building which was constructed at approximately the same time, using practices which were generally accepted as normal for that time and that the property has received maintenance to ensure that the intended strength and serviceability of the building have not significantly deteriorated over time.

Access hole (cover) means a hole in the structure allowing safe entry to an area.

Accessible area is any area of the property and structures allowing the inspector safe and reasonable access within the scope of the inspection.

Building Element means a part of a building performing a particular function either singularly or in conjunction with other such parts.

Client means the person(s) or other legal entity for which the inspection is to be carried out. If ordered by the person(s)'s agent then it is agreed that the agent represents the person(s) and has the authority to act for and on their behalf. (See also "You/Your" below)

Defect means a variation or fault in material or a component or assembled element that deviates from its intended appearance or function.

Inspector means the company, partnership or individual named below that You have requested to carry out a Building Inspection and Report. (See also "Our/Us/We" below.)

Limitation means any factor that prevents full achievement of the purpose of the inspection.

Major defect means a defect of such significance that without correction would not avoid Safety Concerns, loss of the intended practical performance of the building element or an additional decline in the existing condition of the property inspected.

Minor defect means a defect which is not a Major Defect.

Person means any individual, company, partnership or association who is not a Client.

Property means the structures and boundaries up to thirty (30m) metres from the exterior walls of the main building but within the boundaries of the land on which the main building is erected.

Report means the document and any attachments issued to You by Us following Our inspection of the property.

Structural Inspection means the inspection shall comprise visual assessment of accessible areas of the property to identify major defects to the building structure and to form an opinion regarding the general condition of the structure of the property. The Report will not include those items noted in Clause A3 of AS 4349.1-2007 e.g. Condition of roof coverings, partition walls, cabinetry, doors, trims, fencing, minor structures, ceiling linings, windows, non-structural & serviceability damp issues, rising damp, condensation etc.

Safe and Reasonable Access does not include the use of destructive or invasive inspection methods or moving furniture or stored goods.

The Standard AS4349.1-2007 provides information concerning safe and reasonable access:

Only areas where reasonable and safe access was available were inspected. Access will not be available where there are safety concerns, or obstructions, or the space available is less than the following:

Our/Us/We means the company, partnership or individual named below that You have requested to carry out the property inspection and report.

You/Your means the party identified on the face page of this agreement as the Client, and where more than one party all such parties jointly and severally, together with any agent of that party.

You agree that that in clicking 'Tick this box to confirm your agreement' on this web site You have read and understand the contents of this agreement and that the inspection will be carried out in accordance with this document. You agree to pay for the inspection on delivery of the report.

Note: Additional inspection requirements requested by You may incur additional expense in regard to the cost of the inspection.

building inspection Melbourne | building inspections Melbourne | pest inspections | termite inspections